If you own an older property, you’ve probably heard the terms “grouting” and “pointing” mentioned by builders or surveyors. But what do these words actually mean? And more importantly, which one does your building need?
These two techniques might sound similar, but they’re used for completely different jobs. Understanding the difference can help you make the right choices when maintaining your property and talking to contractors about your brickwork.
What Is Grouting?
Grouting is mainly used for tiles and smaller gaps indoors. When you see the lines between bathroom tiles or kitchen tiles, that’s grout. It’s a mixture that fills the spaces between tiles to create a waterproof seal in a small area.
Grout is usually made from cement-based materials mixed with sand and water. Sometimes it includes special additives to make it stronger or more flexible. The main job of grout is to stop water getting behind tiles and to hold everything firmly in place.
You’ll find grouting used in:
- Bathrooms between wall and floor tiles
- Kitchens around worktops and splashbacks
- Swimming pools and wet rooms
- Any area where tiles need to be waterproof
Modern grout often uses cement mortar as its base, but it’s much finer than what you’d use for outdoor brickwork. It’s designed to work in controlled indoor conditions rather than facing changing weather conditions.
What Is Pointing And Brick Repointing?
Pointing, also called brick repointing, is all about maintaining brick walls and brickwork. It’s the process of renewing the mortar joints between bricks or stones in walls. This is especially important for older buildings where the original mortar has started to crumble or fall out.
The mortar joint between bricks does much more than just hold them together. It keeps water out of your walls and helps the whole structure stay strong and stable. When this mortar gets old and starts to break down, that’s when you need brick repointing.
For Victorian properties and older buildings, the original pointing was often done using lime mortar or lime-based mortars. These traditional materials are much better for historic brickwork than modern cement-based alternatives.
According to Historic England, proper pointing is crucial for protecting historic buildings from weather damage whilst preserving their original character.
Understanding Different Types Of Mortar
The type of mortar used makes a huge difference to how well your pointing works. Traditional lime mortar and lime-based mortars are softer and more flexible than modern cement mortar. This matters because old brick walls need to move slightly as temperatures change.
Lime putty, which is made from aged lime, creates mortar that lets brick walls breathe naturally. This helps prevent damp problems and protects the bricks themselves from damage. Many Victorian buildings, including the typical semi-detached house from that era, were built with lime-based mortars.
Using the wrong type of mortar can actually damage brickwork over time. Hard cement mortar can trap moisture and cause the bricks to crack or crumble, especially in older walls including those with timber framing.
The Key Differences Between Grouting And Pointing
The main differences between grouting and pointing come down to where they’re used, what materials are involved, and the standards required:
Location: Grouting is for tiles and small indoor spaces. Pointing is for outdoor brickwork, brick walls, and stone walls that face all weather conditions.
Materials: Grout is usually finer and often includes polymer additives. Pointing mortar needs to match the original materials – often lime mortar for older buildings.
Purpose: Grout creates waterproof seals in wet areas. Pointing protects whole buildings from weather and structural problems whilst maintaining a high standard of weatherproofing.
Scale: Grouting typically covers a small area at a time. Brick repointing often involves entire walls or building sections.
Techniques: Different bricklaying patterns like flemish bond or English bond require specific pointing approaches to maintain the original appearance.
Why The Confusion Exists
People often mix up these terms because both involve filling gaps with a cement-like mixture. But using the wrong technique or materials can cause serious problems for your brickwork.
For example, using modern cement-based grout on old brick walls can trap moisture and damage historic walls. Victorian buildings need lime-based mortars that let the walls breathe naturally and work with the existing damp proof course.
The confusion also happens because both jobs look similar when someone’s doing them. However, the skills, materials, and long-term results are completely different.
When Do You Need Brick Repointing?
Your brickwork probably needs repointing if you notice:
- Mortar crumbling or falling out of mortar joints
- Gaps appearing between bricks
- White stains (called efflorescence) on brick walls
- Damp patches inside your home
- Plants growing from wall joints
- Damage to the damp proof course area
Don’t wait too long to fix these problems. Water getting into brick walls can cause expensive damage to the whole structure and affect everything walls including internal features.
Weather conditions play a big part in how quickly pointing deteriorates. Walls that face south and west often need attention sooner because they get more sun and rain.
Repointing Costs And Planning
Many homeowners worry about repointing costs, but the expense of not maintaining your brickwork properly is usually much higher. Damaged brickwork can lead to structural problems that cost thousands to fix.
The cost depends on several factors:
- The size of the area needing work
- The type of mortar required (lime mortar costs more than cement mortar)
- The condition of the existing brickwork
- Whether the building has special features like flemish bond or English bond patterns
- Access difficulties for the work area
Getting The Right Help For Your Brickwork
For older properties, especially Victorian buildings, you need specialists who understand traditional building methods and can work to a high standard. Modern materials don’t always work well with historic construction.
At G.P Brickwork, we focus on working with older buildings using the right techniques and materials. Our brick repointing service is designed specifically for Victorian properties and other historic buildings across London and Essex.
We understand that each building is different. Whether you have a semi-detached house with English bond brickwork or a period property with flemish bond patterns, we take time to match the original lime mortar and use methods that protect your building’s character whilst ensuring it stays weatherproof for years to come.
Our team knows how to work with lime putty and traditional lime-based mortars. We also understand how different weather conditions affect the work and plan accordingly to deliver results that meet the highest standards.
Protecting your investment
Your home’s brickwork is its first defence against the weather. Proper pointing and maintenance protect everything inside and help maintain your property’s value for the future.
Whether you need work on a small area or complete repointing of brick walls, getting expert advice early can save you money and protect your building’s historic character.
Understanding the difference between grouting and pointing helps you make informed decisions about your property’s maintenance needs and ensures you get the right work done properly by skilled professionals.